Ok, problem is, my throttle is not recognized, all the buttons work on Ch throttle but not the actual throttle, moving it backward and forward to get recognized in settings but no joy:roflmao:, any ideas?
Stevie
Hi Red i’ve read somewhere on il2 forums similar problem.
What joystick do you have?
CH pro Throttle, I’ll have a look over there m8:)
Stevie
I can get my one down from the attic and see if I have the same problem if you want?
Could it be a CH control manager issue? Has it still got a controller number assigned for the axis?
Using a CH throttle with Win10 with 30 keys assigned (i think). Takes a bit downloading the map through CH manager but I think that is a USB hub thing, otherwise works ok.
In CH manager, make sure you re calibrate it as I had some similar problems. It should look like this with a downloaded map.
Iv’e calibrated the joystick and still no luck, the keys assigned to the joystick say:joy3-button 3: for example but that doesn’t sound right to me, or am I missing something in controllers?
Stevie
Does it work n another sim? BOS Clod etc.
If so, clear it out of the controllers in all planes in DCS and restart and try again. Had a similar thing with the a10.
But this problem applies to BoX? Correct?