Results 1 to 2 of 2

Thread: Improving spotting (nvidia primary)

  1. #1
    S/L of OTU Starfire_EAF331's Avatar
    Join Date
    2007-07-06
    Location
    Copenhagen
    Posts
    5,362
    Blog Entries
    8

    Post Improving spotting (nvidia primary)

    This might be old wine in new bottles...but after yesterday when I was unable to anything with my new GTX1080 I decided put some time into researching.
    (Facts: standard AOC monitor, using HDMI @59 MHz 1920x1080 with a nvidia GTX1080)


    My googling ended up on ATAG reading the thread: "THE MEN WHO STARE AT PIXELS" and reading combining it with some setting from the nvidia control panel AND the conf.ini

    EDIT: Sources =>
    (THE MEN WHO STARE AT PIXELS -> https://theairtacticalassaultgroup.c...ighlight=stare)

    (nvidia & Conf.ini -> https://theairtacticalassaultgroup.c...ead.php?t=6534)


    and I was able to see all the pixels on the test picture.





    Conf.ini settings

    [core]
    RandSeed = 0
    TexQual=3
    TexFlags.PolygonStipple=0
    Shadows=1
    SpecularLight=2
    DiffuseLight=2
    DynamicalLights=1
    MeshDetail=2
    LandShading=0
    LandDetails=2
    Sky=3
    Forest=2
    VisibilityDistance=8
    LandGeom=2
    DrawCollisions=1
    Water=-1
    Effects=2
    EffFlags.Light=1
    EffFlags.SpriteRender=0
    Grass=3
    CordEffect=1
    UseFog=0
    UseLandCube=1
    UseLandConnectedObject=1
    LinearObjectManager=1
    Roads=1
    Sun=1
    Clouds=1
    EffFlags.LightSpritesProj=1
    ShadowMapSize=5
    TexFlags.AsyncLoad=1
    TexFlags.ShowTexture=0
    SimpleMesh.SWTransform=0
    SimpleMesh.QuadTreeClip=1
    SimpleMesh.InstancingHW=1
    EffFlags.LightContextSprites=1
    CloudsFlags.Detailed=1
    TexFlags.CreateHDR=1
    Decals=2
    EffFlags.SWLight=0
    TexFlags.CockpitOnePass=0
    MegaTexture=0
    TexFlags.Reflection=1
    RenderTargetQual=3
    MSAA=0
    MeshStatics=2
    MeshStaticsDetail=3
    SimpleMesh.QTNoCompose=0
    MeshFirstLod=0
    MeshShowLod=1
    SpawnHumans=0
    TexFlags.SSAO=1
    TexFlags.VSync=1
    TexFlags.FastTransparency=1

    Game settings




    Nvidia control panel
    EDIT: CSAA are not possible on GTX1070/1080




    Last edited by Starfire_EAF331; 2017-06-13 at 15:44.
    "....Perspective only comes from knowing more than you need to know"
    - Chris Kubasik
    "But ignorence still prevails" -Starfire

  2. #2

    Default Re: Improving spotting (nvidia primary)

    Thanks Starfire

    Managed to change all my Nvidia settings except 1, the interface did not allow me to change the value.
    Also updated the config.ini values and even had to add a line at the end.
    Will check these in-game tomorrow night !
    "Sit and spin the fire". Extract from Topsy Turvey Land, a poem by William Brighty Rands.
    "In the bar everyone knows what they should have done - the problem is in applying it in the heat of the action". F Barthe RIP

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •